DL6300D-12
Quickly switch between drilling pilot holes and driving screws with a simple twist using the SKIL 12V/20V Brushless Flip Drill. The cordless flip drill features a two-in-one double collet flip head that allows you to change between drilling and driving bits quickly and easily rather than swapping between bits using the same chuck. Its slim, compact design gives you easy access to corners, edges, and other tight, hard-to-reach spaces. Electronically controlled torque settings plus drill mode easily adapt to the application at hand. Magnetic onboard storage gives you quick access to bits and screws, and an LED worklight with pre-light and afterglow delivers maximum visibility. The included 20V 2.0Ah USB-C battery features two-way rapid charging that allows you to charge the battery or portable devices with its 60W USB-C port. When it’s time to recharge the battery, the multifunctional charger ditches the traditional power tool charging dock for a compact, convenient format that can plug in anywhere and fully charge the 2.0Ah battery in 55 minutes. The cordless flip drill kit includes the 12V/20V brushless flip drill, 20V 2.0Ah USB-C battery, 20W USB-C charger, USB-C charging cable, belt clip, 2-inch PH2 screwdriving bit, and (4) hex shank HSS bits.
What's Included: (1) 12/20V MultiVolt Brushless Flip Dril [DL6300D-00]; (1) PWRCORE 20™ 20V 2.0Ah Lithium USB-C Battery [BY5100B-00], (1) 20W USB-C PD Charger [PD0020B-00], (1) 3A USB-C to USB-C Cable (Nylon), (1) Belt Clip, (1) 2" PH2 Screwdriving bit, (4) Hex Shank HSS Bits: (2) 3/32", (2) 1/8"
Features
- 20V FLIP DRILL SET - Kit includes the 12V/20V brushless flip drill, 20V 2.0Ah USB-C battery, 20W USB-C charger, USB-C charging cable, belt clip, 2-inch PH2 screwdriving bit, and (4) hex shank HSS bits
- DOUBLE COLLET FLIP HEAD - Quickly change between drilling and driving bits with just a twist
- SLIM, COMPACT DESIGN - For easy access to corners, edges, and other tight, hard-to-reach spaces
- TORQUE ADJUSTMENT & DISPLAY - Electronically controlled torque settings plus drill mode to adapt to the application at hand
- MAGNETIC ONBOARD STORAGE - For quick access to bits and screws
- LED WORKLIGHT - With pre-light and afterglow for maximum visibility
- POWERED BY SKIL 12V OR 20V BATTERIES - Adaptable multiple power sources for convenience
- TWO-WAY RAPID CHARGING - Charge the battery or personal devices with the battery’s 60W USB-C port
- MULTIFUNCTIONAL 20W CHARGER - Charges USB-C compatible SKIL batteries and other devices, fully charges 2.0Ah USB-C battery in 85 minutes
Specs
- Pre-light: Yes
- After-glow: Yes
- Variable Speed Switch: Yes
- Lock-Off: Yes
- Spindle Lock: Yes
- Electric Brake: Yes
- Forward / Reverse Selector: Yes
- Soft Grip: Yes
- On-Board Bit Storage: Yes
- E-Torque: Yes
- Voltage: 12/20 V
- Motor Type: Brushless
- Number Of Gear Speeds: 2
- No Load Speed: 12V: 0-420/0-1550 RPM / 20V: 0-450/0-1700 RPM
- Torque: 12V: 300 in lbs / 20V: 350 in lbs
- Clutch Settings: 9+D, Electronic
- Chuck Capacity: 1/4 in
- Chuck Type: Hex Collet
- Switch Style: One Finger Switch
- Tool Weight: 2.03 lbs
- Tool Length: 7.87 in
- Tool Width: 2.64 in
- Tool Height: 7.39 in
Parts & Accessories
